Rug Cleaning and Care

Information may not be reliable

One of the more popular types of carpet flooring is the Area Rug Cleaning Temple TX. They are perfect for bedrooms, living rooms and even bathrooms. There is a misconception out there though that area rugs are only used in homes. In fact, these carpets are so versatile that many people use them in commercial settings as well.

The truth of the matter is that both types of floor coverings have one important thing in common. They both need to be cleaned. As it turns out, the main difference between the two lies in how they are designed. Think about it: both of your area rugs and your carpet are designed to be lifted and moved like never before. Since they serve totally different purposes, they also need to be designed differently too.

The most obvious difference between your ordinary rug and a rug cleaner is the cleaning solution. Area rugs require that you use a special liquid cleaning solution. The liquid is supposed to go inside the fibers of the rug and get deep into the pile in order to remove all the dirt that has built up there over time. Using ordinary liquid detergents for a rug is not a good idea, as this will just push all the dirt back into the carpet.

To clean area rugs the correct way, you would want to use something that contains enzymes. Enzymes are what allow dirt to be drawn deeper into the fibers. For example, grapefruit place is a deep cleaning solution that is meant for carpets. It is strong enough to draw out any dirt and grime from deep down in the pile of carpets.

There are some types of area rugs that should never be cleaned with any type of liquid detergent at all. One such example is an oriental rug. These kinds of area rugs have been made with the intent on beautifying their home with its beautiful patterns. The designs are very delicate and if they're not cleaned correctly, the beauty of the rug will be compromised. Such a carpet should be properly cleaned using only a detergent that was made for the area rug cleaning industry.

When cleaning area rugs, make sure that you pay attention to the texture of the rug. Some kinds of rugs have a very plush surface, while others have a rough exterior. If you find the rug to have a plush surface and you are planning to clean it using anything other than a detergent designed for the rug, make sure to pay close attention to the texture. Determine if you can easily lift up the rug and apply the cleaning solution. If you can't, then perhaps you shouldn't clean it because the rug will absorb a lot of the solution and you may end up just replacing it.

It is important to dry the rug after cleaning it so that no residue will be left behind. This can easily be done by leaving it outside to dry for a few days. Then you can thoroughly clean the rug by using a hairdryer on a low heat and then setting the rug in a drying location outside. You can also place an awning over it if you want to reduce the sun's glare or if you live in a sunny region.

The best way to thoroughly dry any kind of rug is to use a spray deodorizer specifically designed for cleaning rugs. You can buy these from any carpet store and they work very well. After spraying the deodorizer on the rug, wait around twenty-four hours before vacuuming it. The vacuuming will be necessary to remove any dust particles that were missed during the spray deodorization process. Be sure to follow the directions for using the product and wear protective gloves so that you avoid getting any chemicals on your skin.