|Products and Services:||2,194|
|Articles and publications:||11,234 (+6)|
|Tenders & Vacancies:||12|
Basement Drainage Channels are designed to prevent dirt and water from flooding into a basement. This has proven to be especially valuable in areas that are not well drained such as subdivisions and mobile home parks.
But the government and Foundation Repair Potts Grove PA alike have not been very clear about what those necessary steps are. Until now. Let's take a look at what's required of each homeowner with regard to basement drainage channels.
When we speak of wall drainages, we are talking about both wall and foundation drainage that lead into basements. In addition, there is an external drainage or "spillway" that runs alongside your house from the ground to the second story of your home. This "spillway" is typically called the crawl space and it's very important to consider in terms of what you build and how you design.
The reason the phrase "crawl space" is so important is because it's important to understand what type of materials can be used in the building of a crawl space. Certain types of building materials, such as carpeting, are porous, which means they allow air and water to get inside and cause damage over time.
You'll want to avoid putting fiberglass material in the crawl space for your bathroom or kitchen and an impervious barrier for your main sewer line. Walls should be constructed of concrete or engineered or masonry panels and your floors should be composed of concrete as well.
Basement drainage channels are made out of two types of materials: concrete and vinyl. Concrete drains can be installed using an excavator or with a smaller chisel that gets down to the foundation with an auger. Vinyl drains, on the other hand, will need a small hand chisel to get through the foundation and can require a professional to install.
Since walls are high off the ground, concrete drains won't reach the ground to flush out soil, so they will be channeled into the walls. When these channels go deeper, water will start to run down the walls and into the basement.
Basement walls are also built using waterproof materials. Waterproofing is done by bonding together a variety of materials that form a seal between the wall and the foundation. It is a long process that will require a professional to finish.
The biggest concern for homeowners is leaky pipes. This requires removing the pipes and caulking the joints, as well as giving the area a good seal to prevent leaks. Caulking shouldn't be used on walls where there is paint on the walls, so that would be a mistake.
When it comes to basement drainage channels, most homeowners are concerned with their city's or town's local building code requirements. While codes differ from state to state, most codes require one of two things, which can vary from state to state: type of foundation or type of material for the walls.
Basement drainage channels are usually a combination of both a concrete foundation and an impervious barrier. If you choose to use a concrete foundation for your basement walls, make sure the concrete does not extend past the second story of your home.
If you use impervious barriers, they can cover up mold and mildew and help make a basement more comfortable to live in. Either type of foundation is fine, and it's important to understand the specific materials that are required to construct them.