Roofing Inspection - What is it?

Information may not be reliable

When you are hiring a professional Roof Repair Ocoee FL roofing contractor to perform an inspection of your roof, you should insist on having the contractor to complete a thorough analysis of the work. Doing this before the roofing project begins ensures that the roof is in good shape and there are no significant problems to be worked out.

The first step to conducting a Roofing Inspection is to make sure the job is approved by the Department of Transportation (DOT). In addition, the Roofing Inspection will also need to check with the local building department to ensure that the roof inspection is in compliance with local building codes. Also, the contractor should confirm that the building owner has signed off on the proposal.

The second step for a successful roofing inspection should include an inspection of the roof to ensure that it is structurally sound. The location of the roof and the amount of damage it has sustained during recent storms are two factors that determine the strength of the roof.

When looking at the roof to inspect, the contractor should also take the time to survey the structure to see what sort of damage the roof has sustained recently. While inspecting the roof, the contractor should look for several warning signs including loose shingles, missing hardware, cracked, chipped or worn down nails, broken framing, loose, damaged flashing, and missing roof insulation.

After inspecting the roof, the third step to a Roofing Inspection should include the inspector taking a measurement of the roof to give the contractor an idea of how much work will be involved in repairing the roof. By taking a measurement of the roof, the contractor will be able to take the correct measurements for the proposed repairs. This will save the contractor valuable time and money on future repairs when making repairs from the estimated cost of the roof repair.

The fourth step to a Roofing Inspection should be to have a visual inspection of the roof. A visual inspection includes having the roofer look at the roof from the top to the bottom. The roofer should note any areas of the roof that may be in danger of damage and mention to the contractor any areas of concern.

If there are spots that are of concern, the contractor should be able to offer the contractor a plan to address the problem. For example, if the roof needs to be repaired because there is a hole in the roof, the contractor can offer a "patch-and-cover" approach.

When hiring a roofing contractor, it is important to remember that a good Roofing Inspection involves the inspector taking a look at the roof in the open air to check for safety concerns as well as determine whether the repair will be safe for the structure. If a concern is found during the inspection, the contractor should still complete the job but must follow any corrective action suggested by the inspector.

To ensure that the contractor and the roof are working together in good faith, the inspector should advise the roofer of any recalls on specific products, which the contractor is required to disclose to the consumer prior to installation. There may be instances where the consumer will not have a recall available when he or she requests a product.

Once the Inspectors has looked at the roof and determined whether the roof is structurally sound, the roofing contractors should have an inspection report prepared by a certified professional. This report will include a detailed description of the state of the roof including the damage, the repairs needed, and what type of products will be used to fix the roof.

Lastly, when hiring a roofing contractor for the Roofing Inspection, the contractor should keep all evidence of the inspection safe until they complete the job. This will ensure that there is no confusion about the status of the roofing. Because the Inspectors were not permitted to inspect the roof from the side, it was necessary for the Contractor to provide the Inspectors with a free view of the roofing condition on the same side from which they were performing the inspection. This is not an uncommon practice.