Barney Moravec Inc

Information may not be reliable

Our newest tool to get your well completed on time and within budget...
The 2005 Atlas-Copco T3W-DH

Serving 12 counties in the Finger Lakes Region of Central New York State Now For 76 years and

State of the Art 2005 T3W-DH
Ten years ago we took delivery of a 2000 Ingersoll-Rand Drilling Rig. We also have a 2005 Atlas-Copco (IR) rig with even more capability. The greater the capability the quicker and better results for you. Look for these rigs in the field. The T3W-DH is big and tan with MORAVEC on the side. The 2000 rig is also big but it's red! It is clear that we have the most advanced drilling equipment in Central New York to better serve our customers.

Pump Service Vehicles
Our customized pump service truck helps us install your pump even more efficiently and without dragging the pump assembly through the mud and contaminating your new well. This truck is a class act!
Now we have another pump hoist truck to allow us to more effectively remove and install pump assemblies that must be on steel drop pipe.

We've drilled over 9,200 wells in Central New York!

We've also repaired dozens of wells in the last two years!

We've installed approx. 30,000 vertical feet of geothermal loops; that's over 4 miles of drilling for approx. 200 ton of clean heating and cooling capacity!

Member of National Ground Water Association (NGWA)

Member of Empire State Water Well Drillers Assoc. (ESWWDA)

New York State Council of Professional Geologists (NYSCPG)

International Ground Source Heat Pump Association (IGSHPA)

Have you decided on your heating and cooling system? If not, you should look into the option that can save you up to 70% on those bills. GEOTHERMAL EXCHANGE IS THE WAY TO GO!
Just about three years ago we moved into our new 11,200 sq/ft office and storage facility and our highest total electric bill has been $230. We have enjoyed an annual heating and cooling bill of approx. $2,000. At this rate it's not going to take us very long before we are putting money back into our pockets. Start doing some homework for yourself then come to Penn Yan and see our system, we're sure you will be impressed.
Stay Tuned for more information.
SCHEDULE ! AS OF 11-5-10
Remember, we drill year round Try to plan ahead as much as you can. At this point you can expect to get a well drilled in about 1 to 3 weeks or so. Normally, if we have a rig next to your job it could be the next day if we can get on the site and the weather is ok. The decision to go drill is made on a day by day basis. If you have good access we could drill your well within a few days...weather permitting. Contact us for some insight or check WELL TIPS page.
YOU ARE THE PRESIDENT OF YOUR WATER COMPANY!
DISINFECTING AND TESTING YOUR WELL? WE ARE DISINFECTING WELLS MUCH DIFFERENTLY THAN ANYTHING YOU HAVE EVER HEARD OF BEFORE!
Check out the disinfection and testing page!

WELL WATER...NATURALLY BETTER!
Building Next Year?...Drill As Soon As Our Rigs Can Get On Your Site! Know What You Have For Water Before You Build. But Remember, We Do Drill Year Round.

As of Nov. 23, 2005, NYS Department of Health (DOH) has issued new regulations concerning standards for water wells! There are several changes in the construction of new wells including separation distances from septic systems and actual well construction minimum requirements. Give us a call for updates or stay tuned for more information.

AS OF JANUARY 1, 2003, ALL DRILLERS AND PUMP INSTALLERS MUST BE CERTIFIED AS WELL!

We service these counties in New York State;
Monroe, Wayne, Livingston, Ontario, Seneca, Schuyler, Yates, Chemung, Steuben and parts of Tompkins, Cayuga and Allegany Counties