Brook ANCO Corporation

Information may not be reliable

Nikon Introduces New Digital Microscope ShuttlePix P-400R

Tokyo - Nikon Corporation (Makoto Kimura, President) is pleased to introduce a new concept in Digital Microscopy, ShuttlePix P-400R.
The ShuttlePix P-400R is based on a new shuttle concept* allowing much easier remote inspection for samples, an idea which originally was considered to be too difficult for large scale products. This will allow not only Industrial applications to be the target but also an effective solution for many other practical, imaging problems.
The ShuttlePix P-400R will be exhibited at "IMTS 2010" (September 13-18, Chicago McCormick Place) and "25th Japan International Machine Tool Fair" (October 28 - November 2, Tokyo Big Sight).
* We can offer a style in which the P-400R can be used in a cordless way or as a system unit by adapting onto the Motorized Focusing Stand Controller.

Product Name: Digital Microscope ShuttlePix P-400R
Availability: from November 10, 2010
* Motorized Focusing Stand Controller (P-MFSC) from January 5, 2011

P-400R in combination with Motorized Focusing Stand Controller (P-MFSC) and Touch Panel Monitor (P-TPM)

In the past, microscopes were used to inspect numerous samples such as Electronic and, moulded parts, and all Industrial materials. However in recent years, there has been growing demand to inspect parts and assemblies from Automobile, Boat, Airplane for both engines and airframe, plant pipe line and structures, Art work Restoration and conservation requires fine image recording and inspection without moving the sample.
The ShuttlePix P-400R allows the observer to inspect in a conventional way but also record samples that are difficult or impossible to observe under a conventional microscope. An object can be inspected on site and in its correct position without any risk of damaging it.

The ShuttlePix P-400R allows the removal from the Motorized Focusing Stand Controller providing the possibility to capture images under different conditions with cordless operation. By adapting the ShuttlePix P-400R onto the Motorized Focusing Stand Controller and in combination with the 17" touch panel monitor, image capturing can be easily completed.

The ShuttlePix P-400R allows for simple operation, just like a compact digital camera. For this reason, even without experience or knowledge on how to use a microscope, the observer can easily capture fine images of the sample.

Wide 20x Optical Zoom Covering from Low to High Magnification
An LED illuminator is integrated with the ShuttlePix P-400R in a compact body with 20x Optical zoom lens. It is capable of observing a wide rage of magnifications between 20x-400x (*1) without the need to change a lens.

Observation of All-in-Focus Image, 3D Image
By attaching the ShuttlePix P-400R onto the Motorized Focusing Stand Controller, all-in-focus images can be created easily using the control buttons. Then by using a dedicated Application software, the creation of reports and 3D image observation, measurement is possible.

20x-400x (magnification on dedicated 17" Monitor)
Optical zoom ratio 20:1

Motorized Focusing Stand Controller / Touch Panel Monitor Specifications

All-in-focus, Measurement, Grid indication, Scale indication, etc.

Need to transport your NEXIV System to another facility? Nikon service technicians are trained to properly handle and prepare your high precision measurement instrument during the relocation process.
Diagnostics and functionality are performed before and after relocation to ensure system parameters remain within factory specifications.
Our in-plant and off-site relocation service includes:

System tests before and after relocation, to verify functionality.

Preparation and disconnection of all components.

Installation of shipping brackets, to protect the instrument in transit.

Setup of instrument at new location, according to factory procedures.

Clean, inspect, calibrate (Certification) at new location; verification of all system functions.

For more information please call 1-800-388-7566 or email info@brookanco.com

Nikon's new MM-200 Measuring Microscope is compact and lightweight with an affordable price for all who require precision and accuracy for measuring a variety of metal, plastic, and electronic parts in all industries; especially automotive and electronics. This powerful new microscope is especially designed and engineered with the machining engineers and inspectors in mind. Contact us for a quote or demonstration today.

Brook Anco is a premium supplier of brand name precision measuring instruments and machine tools. We carry a wide selection of visual inspection equipment including microscopes - featuring Nikon Microscopes, Motic Microscopes, Navitar Microscopes, and more; surface characterization equipment, digital imaging and analysis equipment, digital cameas and more. We also carry machine tools and machine tool equipment inculding Trak Controls, Lathes, Clausing Mills, Clausing Lathes, and more.

Machine Tool Parts & ServiceMicroscope Service

New Items added daily
Digital Imaging, Microscopes, Software, Cameras, couplers and more.

Materials Science & Technology 2010 Conference & Exhibition

2010 Brook-Anco Corp.Home | Online Store | Contact